How high should the flame be on a gas fireplace?

How To Adjust The Height Of The Flame In A Fireplace

What should gas fireplace flames look like?

Proper Flame Colour

A gas fireplace should burn flames that are blue, perhaps with very small tips in yellow or orange. The flames should be steady and consistent no matter what. Although, there is a small exception.

How do I make my gas fireplace flame better?

Turn the key valve counterclockwise as far as it will turn to open the gas line. Start the fire by following your gas fireplace lighting instructions. Turn the gas control knob to high to increase the flames in your fireplace if applicable.

Does the flame stay on in a gas fireplace?

Do Gas Fireplaces Always Have A Flame? Gas fireplaces that use a standing pilot ignition system will have a pilot flame that’s always on. Gas fireplaces that use an intermittent pilot ignition system won’t have and/or require a flame that’s always on as the pilot can be switched on and off as required.

Why is my gas fireplace flame so blue?

Gas fireplaces have blue flames because their flames are hotter than the traditional orange and yellow flames. The blue flames being emitted from your fireplace are evidence that your gas is being burned properly and everything is combusting as it should.

Where is the air shutter on a gas fireplace?

Gas Fireplace Troubleshooting – Adjusting the Air Shutter – YouTube

How do you adjust the airflow on a gas fireplace?

Adjust the Air shutter if the Air to Fuel mixture is not correct:

  1. Flame is Yellow or orange producing soot ( low air leading to a rich flame) – Introduce more air by turning clockwise.
  2. Flame is very blue (too much air) – Reduce the air by turning counter clockwise.

How big should a pilot light be on a gas fireplace?

A pilot flame should be blue with a yellow tip and strong enough to cover 1/2 inch at the end of the thermocouple tip. If the flame is too strong and adjusted wrong, it will be noisy and cause improper furnace operation.

Why is my gas fireplace flame so small?

The little flame you see in your gas fireplace after you have turned it off is called a pilot light. A Standing Pilot Light runs constantly, whether your fireplace is on or off.

Should pilot light stay on in gas fireplace?

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

Should a pilot light always be on in a gas fireplace?

Electronic ignition is when the pilot light on a gas fireplace/insert/stove is only running when the fireplace is on, this means that the unit is likely to have a battery backup as well. A standing pilot is always on, always using a small amount of gas to run constantly unless the gas is physically turned off.

What color should a gas fireplace burn?

Healthy Flames

A healthy gas flame will burn steadily with a yellow or orange. If the flame is not yellow or orange it may be a sign that your gas fireplace needs adjusting or cleaning, which should be done by a qualified technician, such as those we have at Kozy Heat.

How do you adjust the flame color on a gas fireplace?

The Gas Fireplace Flame Color adjustment knob is located on the front of your gas fireplace and is used to adjust the color of the flames. Turning the knob clockwise will make the flames more yellow, while turning it counter-clockwise will make them more blue.

Should flames touch gas logs?

In order to avoid carbon monoxide emissions, the flame must avoid touching the logs. As a result, there is no flexibility in rearranging the way the log set looks. Whatever way it comes from the manufacturer is how it will stay.

What is the air shutter for on a gas range?

Burner air shutters help control the air to gas ratio that happens in your gas range equipment. The shutter helps you achieve that small, hard blue flame you’re looking for on each of your burners.

Why is the flame in my gas fireplace yellow?

Yellow Instead of Blue Flame

A yellow flame can be an indication that the burner for the gas logs is dirty or a sign of another combustion-related problem. As a result, gas and air are not mixing properly. That causes the flame to burn with a yellow color, instead of blue.

Is my pilot light too high?

If the flame is blue and weak, and barely reaches the thermocouple, it needs to be stronger. If it extends well above the thermocouple, it’s too strong. If the flame covers the top of the thermocouple and burns steadily with a yellow tip, that’s just about right.

What happens if pilot light is too high?

A proper pilot flame should be blue with a yellow tip and should be strong enough to cover about 1/2 inch at the end of the thermocouple tip. If the flame is too strong and improperly adjusted, it will be blue but may be noisy and lift off the thermocouple, causing improper furnace operation.

What should a pilot light flame look like?

Inspecting a Gas Furnace Pilot Light Flame

A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip. The flame should strong enough to cover about 1/2 inch at the end of the thermocouple tip.

How do I get more gas out of my gas fireplace?

To increase the gas flow (or gas pressure) in your fireplace, you’ll need to first ignite the fireplace, then turn the gas control knob to open the gas line and increase the flame.

Should I turn off fireplace pilot light in summer?

A little heat is produced when your pilot light is on so turning it off in summer can help reduce the heat inside your home. The less heat there is, the less you have to use your air conditioner needs to cool down the house. You can get savings and conserve energy if you turn off your pilot light.

What should a pilot light look like on a gas fireplace?

A healthy pilot flame will be much like a blue “blow torch” flame. It will shoot sideways and be directly on your thermocouple and thermopile sensors. An unhealthy yellow pilot flame is more like a “candle”. It will shoot straight up in the air and will not engulf your sensors.

How do you adjust the pilot light on a gas fireplace?

How To: Adjust the pilot flame – YouTube

Can I run my gas fireplace all day?

You can run a vented gas fireplace all day with little concern for anything other than gas usage.

How much gas does a pilot light use per hour?

Just how much gas does a pilot light consume? Most pilot lights will consume about 600 BTU’s of gas/hour. With 24 hours in a day, that’s roughly 14,400/BTU’s each day. Figuring 30 days, a pilot light will use approximately 432,000 BTU each month.

Is a blue flame hotter than an orange flame?

Blue flames burn hotter than orange flames, with temperatures reaching up to 3,000 degrees Fahrenheit. Along with the complete burning of carbon, this is why gas-burning fires typically have a blue flame.

How often should gas fireplace logs be replaced?

A general rule of thumb when it comes to ceramic propane gas logs is this: a vented log set that has been regularly maintained can last for at least ten years, while a vent-free set with the same regular maintenance will show signs of wear between three and five years if the fireplace is used frequently.

Do you need embers for gas fireplace?

Do you need glowing embers for your fireplace? – YouTube

How do I make my stove flame higher?


How do you adjust the air to flame ratio?

How to adjust air shutters on stove tutorial DIY Windy City Restaurant …

Do I need an air vent for a gas fire?

Often in older houses, which have plenty of drafts through floors and windows, no additional ventilation may be necessary. But all modern homes do require ventilation when a gas fire that are over 6.9 kw and solid fuel stoves that are over 5kw are in use. Whereas all open solid fuel fires require an air vent by law.