What rdk 03117?

RDK-03117 – Something’s not working – X1 and Flex Error Message. Video error messages are a result of occasional system and account issues.

What does RDK 03117 mean?

RDK 03117 means that your main X1 Cable box or those smaller boxes are not getting any transmission. This is not a good sign and you need to diagnose the issue. Transmission errors can be caused due to multiple reasons.

What does RDK 03033 mean?

Video error messages are a result of occasional system and account issues.

What does RDK 03030 mean?

We’re having trouble connecting to the Internet. Please check that your cables are tightly secured and try again. If that doesn’t work, go to xfinity.com/support/status or use the Xfinity My Account app to check for service outages and get additional troubleshooting tips.”

What does RDK 03111 mean?

When this error occurs, you will see this message: … “We’ve run into a problem.”

Why is my Xfinity flex not working?

Activation Troubleshooting

If you’re having trouble activating your Flex streaming TV Box, the most common solution is to restart it by reconnecting your USB-C power cord and HDMI cable to both the Flex streaming TV Box and TV.

What does XRE stand for Comcast?

Customers also reported about the issue on the Comcast’s X1 customer forum, identifying errors labeled “RDK 00104,” “RDK 03006,” and “XRE 00250.” The RDK is the Reference Design Kit, the preintegrated software bundle in all X1 boxes, while XRE stands for Cross-platform Runtime Environment, a platform-independent …

What does RDK 03053 mean?

When this error occurs, you will see the following message on your device: “We’re not able to connect to this set-top box. … Check the coax cable connected to the Cable In outlet on the back of the set-top box and cable wall outlet to make sure it’s finger tight.

What does code RDK 03003 mean?

What does the code RDK 03003 actually mean? When the device is not getting sufficient electricity supply, it indirectly means that the AC outlets will lack enough electricity. This leads to the Xfinity Code RDK 03003 error. Also, this can happen when the AC outlet is loos of the cables are not properly configured.

What does RDK 03003 mean for Xfinity?

When this error occurs, you will see the following message on your device: … “We’re having trouble connecting to the X1 Platform”

What is RDK Comcast?

The RDK is a pre-integrated software bundle, initially developed and licensed by Comcast to create a common framework for powering tru2way®, IP or hybrid set-top boxes and gateway devices and to accelerate the development and deployment of next-generation video services.

What does it mean when my Comcast box says cast?

that is part of the bootup sequence (ca=cable, st=status). try connecting the same set top box to the modem’s cable from the wall and see if it progresses to a complete bootup based on the front display.

What does RDK 03013 mean?

Error Code: RDK-03013 indicates that your X1 Box lacks the prerequisite signal to function or that it is not activated. At this point, try to properly tighten the coax cable, then restart your set-top-box by long-pressing the power button for at least 10 seconds before releasing it.

What is status code 225 on Comcast?

What is Status Code 225 on Comcast? With this status code error, it is clear that there is interference in the signal. The signal can be intruded on as a result of numerous things.

How do I fix RDK 03031?

Solution Code

Please try the following, tighten your connections. Restart your TV Box by pressing the power button for 10 seconds and releasing it. If restarting doesn’t work, give us a call at 1-800-xfinity.” To resolve this issue, you may need to restart your TV Box.

How do I fix my Comcast code RDK 03036?

Ensure that the connections are tight, if applicable. Power cycle the TV Box by unplugging it for 1-2 minutes and plugging it back in. If you’re unable to power cycle the TV Box, try restarting it by saying “Restart TV Box” into your Xfinity Voice Remote or hold down the power button on your TV Box, if applicable.

How do I use Comcast Flex?

Secure the HDMI cable between your TV and the Xfinity Flex streaming TV Box. Plug the power adapter into an electrical outlet and connect it to your Xfinity Flex streaming box, then follow the on-screen prompts to activate. Note: You can also begin the activation process using the Xfinity app.

How do I connect my flex box?

Xfinity Flex How To Connect To TV Instructions, Guide, Tutorial

What does Xfinity Flex cost?

That’s a $4.99 a month value included at no extra cost to you — no strings attached. Brings together top apps and networks including Netflix, Disney+, Hulu, Prime Video, YouTube, HBO Max, Spotify and more. Get over 10,000 free movies and TV shows, including 200 channels from free apps like XUMO, Pluto and Tubi.

How do I reboot my Comcast cable box?

The easiest way to restart your TV Box is to say “Restart TV Box” into your Xfinity Voice Remote.

If your TV has a Power button:

  1. Ensure your cables are tightly secured.
  2. Press and hold the Power button located on the front of the TV Box for 10 seconds.
  3. The TV Box should automatically restart.

Why are my Comcast channels temporarily unavailable?

There can be several possible reasons for not gaining access to your Comcast channels. There can be weak cable connections, bad input for TV, dead remote batteries, or channel support being unavailable. If you’ve got dead batteries, you’ll have to change the batteries in your Xfinity Remote.

How do I refresh my Xfinity?

Performing a System Refresh on X1

  1. Press the A button on your remote control, or visit the Help section in Settings. …
  2. Highlight the System Refresh tile, and press OK.
  3. Please remember that performing a System Refresh will interrupt all X1 TVs and recordings in your home for up to 10 minutes.

How do I fix my Comcast RDK 03004?

To resolve this issue, you may need to try the following:

  1. Ensure cable connections are tightly secured.
  2. Unplug TV Box from electrical outlet.
  3. Wait 10 seconds, then plug back in to restart.

What does RDK 10000 mean?

When this error occurs, you will see the following message on your TV: “Something’s not quite right. Let’s try these steps to fix your connection issue: Check your cable connections are tightly secured. Unplug all of your tv boxes from their power sources for ten seconds, then plug them back in to restart.”

How do you tighten a cable connection?

Comcast TechTips No. 1: Importance of Tightening Cable Connections in …

What does IPSt mean on cable box?

Top Replies

FYI IPSt error mean low/bad signal getting to the box. Here is a Comcast post describing the error. You will probably require a technician out to your house. +1.

What does s1st mean on Xfinity box?

10 months ago. That means the box doesn’t have a working cable signal.

How do I fix my Comcast error code?

You can select to Ask the Xfinity Assistant or Search for the error code in support articles. If you select Ask the Xfinity Assistant, follow the prompts within Xfinity Assistant to troubleshoot and resolve your issue.

How do I setup my Comcast remote to my TV?

If it has a Setup button:

  1. Turn on your TV.
  2. Press and hold Setup until the light at the top of the remote changes from red to green.
  3. Enter 9-9-1. The light should flash green twice.
  4. Keep pressing CH ^ until the TV turns off.
  5. Once the TV turns off, press Setup to lock in the code.
  6. Press the TV power button on the remote.

Do cable cords go in or out?

Do I use “cable in” or “cable out?” Both, since the cable from the wall goes into the “cable in” port. The cable to the TV goes into the “cable out” port.

Why is my Xfinity router blinking orange?

What is this? The Xfinity Gateway Blinks Orange when it undergoes a firmware update. If it isn’t successful, try rebooting your router, checking your cables, or using an Ethernet connection. If the issue persists, contact Support or consider replacing your router.

Who uses RDK?

The RDK software solution is currently deployed as part of leading TV service offerings from pay operators such as Liberty Global, Cox Communications, and Comcast.

What is RDK video?

RDK-V (Reference Design Kit for video) is an open-source software platform for set-top boxes, smart media devices, and video services.

What is RDK developer?

Overview. The RDK is a collection of tools that extend the Rhino application platform with visualization-specific capabilities. Third-party developers can use the RDK SDK to integrate their renderers into Rhino.

How do I connect xfinity to chromecast?

You have two ways to cast content to your Chromecast device from the Xfinity Stream portal.

While you’re watching a program, hover over the player to display the player controls.

  1. You’ll see a Casting button (to the left of the Mini-Player button).
  2. Connect to your Chromecast device by clicking on the Casting button.

What do you do if your cable box says boot?

Once you plug the cable box back in, press the main Power button on the front of the machine or on your remote. The lights on the box’s display should turn on or say “Boot” as it starts back up. Wait 5-10 minutes while the system restarts before trying to use it again to see if the reboot worked.

Why is my Xfinity box not connecting?

Make sure you’ve tightened all cable connections from the wall to your device, turned on your TV and TV Box, checked your remote batteries and that your TV is set to the right input. If none of these worked, tap Continue. We’ll scan your device for potential issues. Choose a System Refresh or Restart a Single TV Box.

What does RDK 03031 mean?

When this error occurs, you will see the following message on your device: … “We’re having trouble connecting to the X1 Platform. This may be temporary so please check back shortly to try again.”

How do I contact Comcast Internet?

Please call us at 1-800-XFINITY to talk to one of our customer service representatives for further information.

How do I fix error code 225 on Suddenlink?

Suddenlink Status Code 225 – How To Fix (Guide)

  1. Reboot your Pace Box.
  2. Re-plug your device cables.
  3. Use another Outlet.
  4. Reach out to Suddenlink Support.
  5. In Conclusion.

What is Comcast status code 221?

When Comcast status code 221 happens, it often results in a steady green light blinking on the cable box. This results in failure to temporarily establish an internet connection. In recent times, subscribers have complained regarding Comcast box connectivity.

How do I fix error code 227?

Comcast status code 227 – How To Fix Guide

  1. Solution 1: Do a complete reboot of your Comcast box.
  2. Solution 2: Check the entire lines and cables.
  3. Solution 4: Try a Different Outlet.
  4. Solution 5: Reach out to the customer support wing of Comcast.
  5. Comcast technician.

Why is xfinity WiFi not online?

Unplug your equipment, wait one minute, and then plug it back in. This method, known as powercycling or rebooting, can fix many connection problems. Make sure your account is up to date on payments by going to the Billing tab in My Account (you may be asked to sign in using your Xfinity ID and password first).

Why does my TV say no signal Xfinity?

Make sure all power cables are plugged into working power outlets for the TV and for your X1 TV Box. Hand-tighten all cable connections to make sure they’re not loose. If using an HDMI cable to connect the X1 TV Box to the TV, confirm that it’s plugged into the proper locations.

What does RDK 03103 mean?

“You may need to move your set-top box closer to your Wi-Fi router. Also, check that your router is powered on.”