How do you reset b hyve?

To reset your timer back to factory settings turn the timer to the OFF position by rotating the dial. Open the front panel and press the reset button for 10 seconds this will erase all programming and set the timer back to its original settings.

Where is the B-hyve reset button?

First, put your timer into “Pair Mode” by pressing the B-hyve button 5 times rapidly, or if you are using the B-hyve Indoor/Outdoor timer then hold the reset button that is located on the backside of the timers face down for 10-12 seconds.

How do I reconnect my B-hyve?

Pairing the Orbit B-Hyve Wifi Timer – YouTube

Why is my B-hyve not working?

If your display is still not working, then we’d like you to reset the gray ribbon cable located on the inside of the swing panel of the B-hyve device. To do this, simply unplug the gray ribbon cable from the B-hyve device’s power board, leave it out for about 10-15 seconds, and then plug it back in.

Why is my B-hyve wont connect to WiFi?

Simply hold down the reset button for 10-12 seconds, or until everything lights up on the timer display for the Indoor/outdoor timer. For our indoor timer, please press the B-hyve button on the front of the timer 5 times. After this, it should start blinking blue. Try pairing with a different device.

How do I reset my B-hyve hose faucet timer?

If it did not find your timer, perform a power cycle by removing the battery pack for 3-5 seconds, and then re-inserting the battery pack. Then, factory reset by pushing the B-Hyve Button 5 times and try again. Next, connect the timer to WiFi by selecting the device group you wish to connect to.

How do I manually program my B-hyve?

Manual Program for Orbit B-hyve – YouTube

How do I reconnect to the Internet?

Step 1: Check settings &amp, restart

  1. Make sure Wi-Fi is on. Then turn it off and on again to reconnect. Learn how to connect to Wi-Fi networks.
  2. Make sure Airplane mode is off. Then turn it on and off again to reconnect. …
  3. Press your phone’s power button for a few seconds. Then, on your screen, tap Restart .

How do I reconnect to Wi-fi?

To connect to the network, tap Connect. To change Wi-Fi settings, tap All Networks. To not get notifications for that network, clear the notification.

Turn on &amp, connect

  1. Open your device’s Settings app.
  2. Tap Network &amp, internet. Internet.
  3. Tap a listed network. Networks that require a password have a Lock .

How do I connect my B-hyve XD to WIFI?

Pairing The B-hyve WiFi Hub and Hose Faucet Timer – YouTube

What does no AC mean on my orbit sprinkler system?

The “No AC” means the battery is powering the unit but won’t power the sprinkler controls. It’s either the prime power source or the unit.

How do you use the B-hyve app?

Pairing and Initial Setup of B-hyve App – YouTube

How do I turn off B-hyve smart watering?

When connected, the wifi icon on the timer will stop blinking and show solid lines . llations . You can re-pair your smart device with your B-hyve™ timer by turning the dial to “Off” and pressing the reset button on the back of the swing panel .

How do you delete start time on B-hyve app?

Delete Custom Programs on Orbit B-hyve – YouTube

How do I manually turn on my sprinkler system?

Manual mode on Orbit Indoor Easy Dial Timer – YouTube

Why is my mobile data not working on my Samsung?

Go to Settings &gt, Data Usage and make sure mobile data is checked ☑ and there is no data limit blocking you. Go to Settings &gt, More networks &gt, Mobile networks &gt, Access point names and make sure you have your Carrier selected (For all APN settings click here).

Why is my mobile data not working?

“My mobile data is on but not working” could be caused by a minor system glitch or an error from your mobile operator that can be fixed by rebooting your phone. In that case, just reboot your phone to see if the trick works: You can restart most Android devices by long-pressing the power button for about 10 seconds.

Why my phone is not connecting to Wi-Fi?

Reset your phone’s network and OS settings

Restarting your phone can clear glitches and help it reconnect to Wi-Fi. If your phone still won’t connect, then it’s time to do some resetting. In the Settings app, go to “General Management.” There, tap “Reset.” … Your phone will restart — try connecting to Wi-Fi again.

How do I reset my Wi-Fi router from my phone?

Restarting your router using the Linksys app

  1. Connect your mobile device to your router’s Wi-Fi then open the Linksys app.
  2. For iOS, tap Manage Your Wi-Fi.
  3. You will be prompted to log in using your Linksys server account. …
  4. On the Dashboard, tap the Menu. …
  5. Tap Network Administration.
  6. Tap Restart Router.
  7. Tap Restart.

Why is my Wi-Fi not working on my phone iPhone?

Reset your Network Settings. If you’re using iOS or iPadOS 15 or later, tap Settings &gt, General &gt, Transfer or Reset [Device] &gt, Reset &gt, Reset Network Settings. … This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.

Why is my Wi-Fi not working even though it’s connected?

Outdated network driver. Sometimes, an old, outdated, or corrupted network driver can be the cause of WiFi connected but no Internet error. Many times, a small yellow mark in your network device name or in your network adapter could indicate a problem.

Will B-hyve work without Bluetooth?

not getting notifications- B-hyve app

In order to receive notifications, your B-have device must be connected to a WiFi connection. Notifications will not be sent while using Bluetooth only or witho…

How do I reset my orbit sprinkler system?

Reset to Factory Default – Orbit Irrigation B-hyve Help. To reset your timer back to factory settings: Turn the timer to the OFF position by rotating the dial. Open the front panel and press the reset button for 10 seconds.

What does no AC power mean on phone?

“NO AC” shown in the bottom right of the display indicates that the control panel is not receiving power.

How long should you leave the sprinkler on?

It is ideal to water lawns about one inch of water per week. To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water.

Can you control B-hyve from anywhere?

The b·hyve smart sprinkler timer app allows you to control or monitor your sprinklers from anywhere in the world with the convenience of your smart device. … When set and left in smart watering mode, b·hyve can save users as much as 50% more water over a traditional controller.

How do I winterize B-hyve?

Winterize Orbit b-hyve Property Sprinkler System – YouTube

How do I change the start time on my B-hyve?

Press the “Add Another Start Time” button and select the desired start time. Hint: The hours and minutes can be selected then set by selecting a time on the clock. Press “OK” to continue and return to custom programs screen.

How do I stop rain delay on B-hyve?

Rain Delays on Orbit B-hyve – YouTube

How do I delete orbit?

Disconnecting Orbit from the app, is just as simple as connecting Orbit!

  1. Go into your Orbit settings (press the 3 little vertical dots on the right side of the Orbit in your device list)
  2. Press the red button next to “delete this orbit”, confirm and it’s gone!