What is the mpr rating on filters?

*Your filter’s MPR (Microparticle Performance Rating) indicates its ability to capture tiny particles between 0.3 and 1 micron in size. The higher the MPR, the more microparticles—such as pollen, pet dander, smoke, bacteria and viruses—your filter will capture from the air passing through it.

What is a good MPR rating?

A good MPR rating to start at is MPR 600. Filters with an MPR 600 rating strike a good balance between filtration efficiency and airflow. If you are susceptible to allergens such as fine dust or pollen, moving up to an MPR 1000 filter is the next step in air filtration efficiency.

Is MPR or MERV better?

While MERV ratings reflect a filter’s ability to trap both microscopic and macroscopic particles, MPR ratings only grade a filter on its capacity to remove particles from 0.3 to 1 microns.

Is MERV 13 too high?

Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.

How many MPR is MERV 13?

The MPR system is the superior standard. 2

MERV 12 35% 80%
MPR 1500 54% 83%
MERV 13 50% 85%
MPR 1900 62% 87%
MPR 2200 69% 90%

Is higher MPR better?

*Your filter’s MPR (Microparticle Performance Rating) indicates its ability to capture tiny particles between 0.3 and 1 micron in size. The higher the MPR, the more microparticles—such as pollen, pet dander, smoke, bacteria and viruses—your filter will capture from the air passing through it.

What MERV rating is filtrete 1500?

Each Filtrete Healthy Living 1500 filter has a microparticle performance rating (MPR) of 1550, which is comparable to a MERV 12 rating. This is one of the highest residential MERV ratings, which were created by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).

What MERV rating is filtrete 600?

Filtrete MPR 600 Pollen Air Filters

Attribute Name Value
Filter Life 3 months
MERV Rating MERV 7
MPR Rating 600
Overall Thickness (Imperial) 1 in

What MERV rating can my HVAC handle?

The EPA recommends MERV ratings of 9-12 because it is the most effective at keeping your home’s air clean. A filter with this rating will prevent particulates as small as 1 micron from entering your HVAC system. This rating qualifies as HEPA (high-efficiency particulate absorption) level.

What is MERV rating of Filtrete filters?

The Filtrete Advanced Allergen , Filtrete™ Ultra Allergen , Filtrete Micro Allergen , and Filtrete Dust &amp, Pollen are rated as MERV 12, MERV 11, MERV 11 and, MERV 8, respectively. 3M highlights the portion of the ASHRAE 52.2 test that focuses on sub-micron particles with its own performance rating.

Can my HVAC handle a MERV 13 filter?

MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.

What MERV rating is HEPA?

High-Efficiency Particulate Air (HEPA) filters are not MERV-rated, but a HEPA filter is typically considered as MERV 17 to 20, which is the highest group in MERV ratings.

What MERV rating do I need for Covid 19?

What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.

What MERV rating is filtrete 1200?

Filtrete MPR 1200 Allergen Reduction Air Filters (4″ – 6″)

Attribute Name Value
Filter Life 12 Months
MERV Rating MERV 11
MPR Rating 1200
Overall Thickness (Imperial) 4 in, 5 in

What is a good MERV rating for furnace filters?

Generally speaking, our recommended MERV rating for furnace filters runs from 6 to 8 for a great balance between top furnace efficiency and home comfort. Choosingthe right MERV rating for your furnace filter has a major impact on your indoor air quality, your HVAC system and, most important, your family’s well-being.

What MERV 2200?

The 2200 Elite Allergen filter carries a 3M Microparticulate Performance Rating of 2200 MPR (roughly equivalent to MERV 12).

What is the MERV rating on 3M filters?

3M recommends the use of 3M™ Commercial HVAC Filter Products with a minimum rating of MERV A14. 1 The particle capture efficiency will reduce in actual use.

What MERV rating is FPR 7?

MERV 11 is equal to FPR of 7.

What is the difference between MERV 13 and MERV 16?

MERV 13-16 filters are capable of trapping 90% or more of particles in the 1.0-10.0 micron range. MERV 13 will prevent less than 75% of the 0.3-1.0 micron particles from passing through, MERV 14 will get up to 84%, MERV 15 up to 94% and MERV 16 can trap 95% or more of the smallest particles.

What MERV rating is filtrete 1550?

Filtrete MPR 1550 Allergen, Bacteria &amp, Virus Air Filters (4″ – 6″)

Attribute Name Value
Filter Life 12 Months
MERV Rating MERV 12
MPR Rating 1550
Overall Thickness (Imperial) 1 in, 3 in, 4 in, 5 in, 6 in

What MPR 1550?

Superior Filtration. With a microparticle performance rating (MPR) of 1550, this filter is comparable to a MERV 12 rating.

What MPR is MERV 8?

MPR 600 is equal to MERV Rating 8. MPR 1000 is equal to MERV Rating 8. MPR 1200+ is equal to MERV Rating 11. MPR 1500 is equal to MERV Rating 11.

Do pleated filters have fiberglass?

In the modern age of air filtration, pleated filters outdo their fiberglass counterparts in just about every category. They’re far more efficient, they’re safer for your air and your HVAC unit, and they’re not significantly more expensive.

Can you wash a Filtrete filter?

How do I clean my pre-filters? First, turn off your Filtrete™ Smart Air Purifier. Next, pull the two pre-filters out and rinse them off in your sink. Simply run them under tap water to remove any dust and debris.

What do MERV and MPR mean?

MPR (Microparticle Performance Rating) and MERV (Minimum Efficiency Reporting Value) both measure how well a filter works, but they do things differently.

Can I use MERV 11 in my furnace?

Increased usage can lead to more wear and tear, so make sure to regularly maintain your furnace. MERV 11 filters however, are not considered to be too high for residential use.

Will MERV 11 hurt my furnace?

In particular, using an air filter with a MERV rating that’s too high can damage the compressor, heat exchanger, and air conditioner coil. In most cases, a MERV 11 air filter isn’t too high for residential use.

Can my furnace handle MERV 11?

The short answer is that it can, but it’s not really an issue except under extreme circumstances. Most modern HVAC systems have no problem working with higher MERV filters, which is why millions of homeowners depend on them.

Do HEPA filters stop coronavirus?

When used properly, air cleaners and HVAC filters can help reduce airborne contaminants including viruses in a building or small space. By itself, air cleaning or filtration is not enough to protect people from COVID-19.

Is MERV 14 too high?

MERV 14 is too strong for most home HVAC systems.

An excellent home filter is the MERV 13 Titanium. And these are some of the best on the market. Explore our MERV 13 Titanium filters to find a size that fits your home.

Is MERV 11 or 13 better?

The MERV 13 is less popular and is the highest rating that is recommended for residential use. Anything above 13 is mainly used for commercial/industrial purposes. A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air.

Can I use MERV 13 filter for face mask?

Enjoy the world and protect yourself at the same time with the FiltersFast MERV 13 Face Mask Filters. This impressively effective filter works in your face mask and boasts a MERV rating of 13. Swapping out the filter in your fabric mask will keep you breathing the freshest and cleanest air possible.

Can you use a HEPA filter for your HVAC?

A HEPA filter commonly ranks at MERV 17-20. Generally, the highest rating you can safely use in your furnace is MERV 13, but we advise asking a heating and cooling company like Service Experts Heating &amp, Air Conditioning beforehand to prevent damage to your furnace.

What’s better than a HEPA filter?

ULPA filters trap more and smaller particulate matter than HEPA filters. ULPA filters are 99.999% effective at removing submicron particulate matter of 0.12-micron diameter or larger, while HEPA filters are 99.97% effective for eliminating particulate matter of 0.3-micron diameter or larger.

What does a MERV 13 filter do?

A MERV 13 filter is a step in the right direction and captures more particles than a typical MERV 8 filter. However, it is not as good at capturing small virus sized particles like a HEPA can. A MERV 13 will trap less than 75% of air particles that are 0.3-1.0 micron in size (the coronavirus is 0.1 microns).

How long do MERV 13 filters last?

For Merv 8, 11 and 13 filters, we recommend that you change your filter at least every 3 months, however changing your filter every 2 months provides better filtration which provides healthier and cleaner air in your home.

Do MERV filters remove VOCs?

Is There a Single Solution to Remove VOCs? On their own, high-efficiency particulate filters (those with ratings ranging from MERV 13/13A up to HEPA filters) cannot completely remove volatile organic compounds from the air as these filters can only target particulate matter (PM).

What MERV rating is filtrete 2500?

Filtrete Smart MPR 2500 Premium Allergen &amp, Ultrafine Particles Air Filters

Attribute Name Value
Filter Life 3 months
MERV Rating MERV 14
MPR Rating 2500
Overall Thickness (Imperial) 1 in

Is filtrete 1500 a HEPA filter?

This filter captures 99.97% of unwanted airborne particles, thanks to True HEPA filtration. It even captures particles 1000x smaller than you can see, so you can breathe cleaner, fresher air in your home. (Disclaimer: from the air passing through the filter media. Initial efficiency value.)

Can a furnace filter be too restrictive?

Burnt out motors and controls can result from too-restrictive filters. Coils, motors, and blowers can also easily become clogged by weak filters creating higher fan usage resulting in higher energy costs.

Can my furnace handle MERV 14?

The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. These filters can be used without any modifications to your equipment. Your system may handle MERV 14-16 with no discernable stress. However, many residential systems require modifications to pull air through these filters.

Is MERV 11 better than 12?

Luckily, MERV 11-rated filters handle those particles — such as pet hair and dust mites — with ease. Likewise, MERV 12 filters catch about the same types of particles. The difference between 11 and 12, therefore, is quite negligible. We do not carry MERV 12, MERV 11 does just as good a job.

How often should you change your air filter?

Here are averages that may help you know how regularly you should get a new air filter at your residence: Vacation house or one occupant and no pets or allergies: every 6–12 months. Ordinary suburban home without pets: every 90 days. One dog or cat: every 60 days.